Inventory Unit Detail

  1. Home
  2. Inventory Unit Detail

2017 John Deere Z915B

$6,500.00

$6,500.00

Overview

New/Used Used
Availability In Stock
LocationBlue Mountain Small Engine Repair
Primary ColorGreen
Trim ColorYellow
Stock # Z915B
VIN 1TC915BVJET020221
Condition Excellent

Product Features

Dealer Notes
John Deere Z915B ZTrak B 54" Z-Turn, Fully Serviced by Blue Mountain Small Engine Repair!

Description

Features
  • 7-Iron™ II Mowing Deck
  • Gasoline Engine
  • Hydrostatic Drive Train
  • Commercial-grade Operator Seat
Engine
  • Model no.: CV742
  • Horsepower (gross): At 3600 rpm 25 hp / 18.6 kW
  • Displacement: 45.6 cu in. / 747 cc
  • Cylinders: Two
  • Crankcase capacity: With filter 2 U.S. qt / 1.9 L
  • Oil filter: Full flow, replaceable
  • Lubrication: Full pressure
  • Cooling: Air
  • Air cleaner: Pre-cleaner: Yes; Heavy-duty canister type with safety element
Fuel System
  • Fuel type: Gasoline
  • Fuel consumption - Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr / 4.2-7.2 L/hr
  • Fuel tank capacity: 11.5 U.S. gal. / 43.5 L
  • Fuel tank switch/shut-off valve: Yes
Electrical System
  • Charge system: 15 amp
  • Battery voltage: 12 V
  • Cold cranking amp: 300 amp
  • Hour meter: Standard, digital
  • Operator presence starting system: Brake-N-Go (hand)
Drivetrain
  • Hydraulic pumps: Tuff Torq® heavy-duty integrated piston pump
  • Wheel motors: Tuff Torq heavy-duty integrated piston wheel motor
  • Travel speed: Forward: 0-10 mph / 0-16.1 km/h; Reverse: 0-4.5 mph / 0-7.2 km/h
  • Speed and direction control: Twin levers
  • Hydraulic capacity: 5.9 U.S. qt / 5.6 L
  • Filter: Internal, replaceable
Tires
  • Drive tires: 24x9.5-12 (48 in.), 24x12-12 (54 in., 60 in.)
  • Load rating: 4 PR
Brakes
  • Dynamic braking: Twin levers
  • Park brake: Internal wet disk integrated in the transmission
  • Park brake actuation: Hand brake
PTO
  • Type: Electro-magnetic 200 lb-ft / 271 Nm
  • Drive: V-belt
Mower Decks
  • Deck construction: One-piece stamped steel with reinforcements
  • Deck thickness: 7 gauge; 0.179 in. / 4.6 mm
  • Discharge: Side
  • Height-of-cut range Increments: 0.25 in. / 0.64 cm - 1-5.5 in. / 2.54-14 cm
  • Cutting width: 48, 54, 60 in. (122, 137, 152 cm)
Blades
  • Length: Varies by deck size
  • Thickness: 0.25 in. / 0.64 cm
  • Tip speed: Approximately 18,000 fpm / 5486 m/min
  • Number: Three
Wheels
  • Caster wheel type: Pneumatic Front
  • Caster wheel size: 13x5-6
  • Front anti-scalp rollers: RH, center, LH
  • Rear anti-scalp rollers: Optional
Dimensions
  • Length: 84 in. / 213 cm
  • Width: With chute down 62, 68, 74 in. / 157, 173, 188 cm
  • Height with ROPS up: 73 in. / 185 cm
  • Height with ROPS down: 47 in. / 119 cm
  • Weight: 1100 to 1178 lb / 499 to 534 kg

Engine

Horse Power 25 hp (18.6 kW)
Engine Type CV742
Displacement 45.6 cu in. (747 cc)

General

Transmission Tuff Torq® heavy-duty integrated piston pump
Wheel Size Drive tires: 24x9.5-12
Fuel Capacity 11.5 U.S. gal. (43.5 L)

Deck

Deck Size Optional: 48, 54, 60 in. (122, 137, 152 cm)

Shopping Tools