Inventory Unit Detail

  1. Home
  2. Inventory Unit Detail

Toro 5000 Series 52" 25HP EFI 747cc (72906)

$16,800.00

$16,800.00

Key Features

New/Used Used
Usage314 Hours
Availability In Stock
LocationBlue Mountain Small Engine Repair
Primary ColorRed
Stock # 72906
Condition Good

Product Features

Dealer Notes
Used 5000 Series 72906!
The Engine is a 25.5 HP Fuel Injected Kohler!
The Deck Size is 52"!
The Price is $16,800 With the Bagger!

Description

Z Master® 5000 EFI - 25 HP (18.4 kw) Kohler® Command Pro EFI 747cc Engine with 52" (132 cm) TURBO FORCE® deck.

Highlights
  • 25 HP (18.4 kw) Kohler® Command Pro EFI 747cc Engine
  • 52" (132 cm) TURBO FORCE deck
  • Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue
  • Unitized pump and wheel motor uses proven commercial hydraulic components while eliminating hoses and other potential leak points
Features
  • Deluxe Handcrafted Seat with Arm Rests NEW72: Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.
  • Exclusive TURBO FORCE Deck: High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
  • 7-Gauge, High-Strength Steel: The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
  • A Flat Crisp Cut with Precision Blades: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  • Rubber Discharge Chute: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • Smarter design in a bull-nose bumper.: 7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
  • Patented Adjustable Baffle: Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.
  • Smooth, Powerful Response:
  • Folding Rollover Protection System ROPS: A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
  • Operator Information Center:
  • Cast Aluminum Spindle: Cools quickly for enhanced durability and performance.
Specifications
  • Engine: 25 hp (18.4 kw) Kohler® Command Pro EFI 747cc
  • Fuel Capacity: Gasoline - 12 gallons (45 L) single-point fill
  • Adjustable Discharge Baffle: Standard, tools-free
  • Air Filter: Heavy-Duty Canister Air Cleaner
  • Blade Tip Speed: 18,500+ ft/min (5,640 m/min)
  • Blade Type: 1/4" (6 mm) thick heat-treated steel
  • Carrier Frame: 3" x 1-1/2" (7.6 x 3.8 cm) tubular steel
  • Caster Tires: 13" x 6.5"- 6" (33 x 16.5 - 15.2 cm) flat-free semi-pneumatic
  • Deck Design: 80-Grade 7-gauge 52" (132 cm) TURBO FORCE® w/bull-nose bumper
  • Discharge Chute: Rubber
  • Drive System: Hydraulic unitized pumps and wheel motors
  • Drive Tires: 23 in x 9.5 in -12 in (58.4 cm x 24.1 cm - 30.5 cm)
  • Ground Speed: 10 mph (16.1 kph) forward
  • Height of Cut: 1" - 5.5" in 1/4" (2.5 - 14 cm in 6 mm) increments
  • Hour Meter: Standard
  • Hydraulic Fluid: Premium synthetic
  • ROPS: Folding; standard
  • Seat: Handcrafted deluxe suspension seat with arm rests featuring bullhorn accent
  • Spindle Bearings: Greaseless ball bearings
  • Spindle Housing: 9" (22.9 cm) diameter cast aluminum
  • Steering Controls: 1-5/8" (4 cm) dia. levers; adjustable
NOTES:
*The gross horsepower of this engine was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

Engine

Engine Manufacturer Kohler®
Engine Type Command Pro EFI

General

Transmission Hydraulic unitized pumps and wheel motors
Wheel Size 23 in. x 9.5 in. -12 in. (58.4 cm x 24.1 cm - 30.5 cm)
Fuel Capacity 12 gal. (45 L)

Deck

Deck Size 52 in. (132 cm)

Shopping Tools