Inventory Unit Detail

  1. Home
  2. Inventory Unit Detail

Toro Pro 5000 52" (132 cm) 25 HP 725cc (74903)

$6,800.00

$6,800.00

Overview

Usage525.3 Hours
Availability In Stock
LocationBlue Mountain Small Engine Repair
Primary ColorRed
Stock # 74903
VIN 310000227
Condition Good

Product Features

Dealer Notes
Used Toro 2000 Series Z-Turn, Fully Serviced by Blue Mountain Small Engine Repair! 525.3 Hours!

Description

Z Master® Professional 5000 - 25 hp (18.6 kw) Kohler® Command 725cc Engine with 52 in (1.3 m) TURBO FORCE® deck. Model Shown 74915.

  • 25 hp (18.6 kw) Kohler Command 725cc Engine
  • 52 in (1.3 m) TURBO FORCE deck
  • Deluxe suspension seat features thick cushions, large bolsters and
  • 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue
  • Unitized pump and wheel motor uses proven commercial hydraulic components while eliminating hoses and other potential leak points
Features
  • Exclusive TURBO FORCE Deck: High-capacity TURBO FORCE decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE decks can be fine-tuned in order to conquer changing turf conditions.
  • 7-Gauge, High-Strength Steel: The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
  • Industry's Toughest Spindle Assemblies: Toro's rugged spindle assemblies survive impacts that would destroy lesser spindles. A stout cast iron housing with a massive base and six mounting bolts absorbs impact loads and distributes them across a broader area of the deck shell. Plus, the solid, one-inch diameter shaft is alloy steel, not the common lower-grade steel used in many competitive models. 72" Deck will have tapered bearing only.
  • A Flat Crisp Cut with Precision Blades: (.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
  • Deluxe Suspension Seat: Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.
  • Rubber Discharge Chute: High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
  • Smarter design in a bull-nose bumper.: 7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4" (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf "plowing" during spring and fall clean-up also is significantly reduced.
  • Patented Adjustable Baffle: Allows operator to achieve maximum cutting performance by fine-tuning deck to conquer changing conditions, unique job sites or different times of the season. In extreme conditions, the baffle can be opened in order to conserve power and achieve faster mowing speeds. In less demanding conditions, the baffle can be closed to yield micro-sized particles and maximize discharge velocity.
  • Smooth, Powerful Response: The new unitized pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You'll get a smoother, faster response while enjoying an even more reliable machine.
  • Operator Information Center: The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.
  • Folding Rollover Protection System ROPS: A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
  • Convenience and Comfort: Operator controls are conveniently located. Large 1-5/8" (4.1 cm) diameter steering levers increase comfort and reduce fatigue. Handy storage compartment provides location for cell phone, tools, and more. Built-in cup holder provided.
Specifications
  • Engine: 25 hp (18.6 kW) Kohler® Command 725cc
  • Fuel Capacity: Gasoline - 12 gal. (45.5 L) single-point fill
  • Adjustable Discharge Baffle: Standard
  • Air Filter: Heavy-Duty Canister Air Cleaner
  • Blade Tip Speed: 18,500+ ft./min (5,638.8 m/min)
  • Blade Type: .25 in. (.2 cm) thick heat-treated steel
  • Carrier Frame: 3 in. x 1.5 in. (7.6 cm x 3.8 cm) tubular steel
  • Caster Tires: 13 in. x 6.5 in. - 6 in. (33.0 cm x 16.5 cm - 15.2 cm) flat-free semi-pneumatic
  • Deck Design: 7-gauge 52 in. (1.32 m) TURBO FORCE® w/bull-nose bumper
  • Discharge Chute: Rubber
  • Drive System: Hydraulic unitized pumps and wheel motors
  • Drive Tires: 23 in. x 9.5 in. -12 in. (58.4 cm x 24.1 cm - 30.5 cm)
  • Ground Speed: 10 mph (16.1 kph) forward
  • Height of Cut: 1 in. - 5.5 in. (2.5 cm -14 cm) by.25 in. (.6 cm) increments
  • Hydraulic Fluid: Premium synthetic
  • ROPS: Folding; standard
  • Seat: Deluxe suspension
  • Spindle Bearings: Geasable ball bearings
  • Spindle Housing: Cast iron
  • Steering Controls: 1.625 in. (4.1 cm) dia. levers; adjustable
Accessories
  • E-Z Vac™ DFS Collection System: Quiet and powerful, the Toro E-Z Vac™ collection system is spindle-driven and offers quick conversion between bagging and side discharge without tools. The horizontal blower impeller is positioned parallel to, and above the mower deck creating continuous airflow from deck to collection system. The Dump-From-the-Seat (DFS) features allows you to dump debris in only seconds - without ever having to leave your seat!
  • E-Z Vac Twin & Triple Bagger Systems: Toro® Z Master® E-Z Vac™ Twin and Triple Baggers deliver the convenience and versatility essential to landscape professionals' productivity. The no-tools, quick-release design allows you to remove the collection system with ease, making it a snap to alternate between bagging and side-discharge.
  • Light Kit: The lights easily mount to the mower frame and wiring quickly connects to the existing accessory circuit.
  • Operator-Controlled Discharge Chute: Landscape friendly rubber discharge chute provides complete control of clippings. with three discharge settings, from wide open to blocked, the OCDC will put the clippings where you want them and not in beds, streets, etc. The integral design allows the discharge chute to remain in place and on the machine, reducing the risk of personal injury and property damage.
  • Recycler® Mulching Kits: Recycler mulching kits deliver the industry's finest mulching performance and reduce mowing time up to 38% vs. bagging*. (*Respondents in a Texas A&M University study cut their lawns 38% faster when they didn't bag.)
  • Roller Striping Kit: Roller striping kit is easily installed and provides a premium "ball park" after-cut appearance.
  • Toro Z Stand: Exclusive Toro Z Stand provides an on-board tool to simply elevate the front end of the machine and provide access to the underside of the deck.
NOTES:
The gross horsepower of this engine was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission, and operating requirements, the actual engine horsepower on this class of mower will be significantly lower.

Engine

Engine Manufacturer Kohler®
Horse Power 25 hp (18.6 kW)
Engine Type Command
Displacement 725cc

General

Transmission Hydraulic unitized pumps and wheel motors
Wheel Size Caster Tires: 13 in. x 6.5 in. - 6 in. (33.0 cm x 16.5 cm - 15.2 cm); Drive Tires: 23 in. x 9.5 in. -12 in. (58.4 cm x 24.1 cm - 30.5 cm)
Fuel Capacity 12 gal. (45.4 L)

Deck

Deck Size 52 in. (1.32 m)
Discharge Type Side; Optional: Bag, Mulch

Shopping Tools